- January 10, 2023
- Posted by: admin
- Category: News
Powder coating, a new type of building interior wall decoration material. Compared with traditional liquid coatings, both in terms of transportation and storage, and construction utilization rate are slightly better, so many people now choose powder coatings when decorating. The following is a detailed introduction to the points of powder coatings, so that everyone can understand this new type of solid coating more clearly.
1. Health and environmental protection
In the production process of powder coatings, various liquid chemical additives such as harmful film-forming, dispersion, wetting, leveling, anti-corrosion and anti-mildew are omitted. Therefore, this product is non-toxic, solvent-free, and non-toxic and volatile. Therefore, the powder coating is non-toxic, non-fire, and non-“three wastes” emissions, and meets the requirements of the national environmental protection law.
2. No preservatives needed
Traditional coatings are liquid, which contains both water and substances that are easily contaminated by bacteria. Therefore, in order to prevent the deterioration of liquid coatings, manufacturers will add some preservatives to them, and these preservatives can cause harm to the human body. But powder coatings are different. They are latex powder, granular products, no water, no need to worry about being contaminated by bacteria, no need to add preservatives, and healthier.
3. Smell
Anyone who has decoration experience or has been to a new building knows that after the traditional paint is painted, it will leave an unpleasant smell, and it will not disperse for a long time. But powder coatings are different. Although there may be a slight smell when first painted, the smell dissipates very quickly.
4. The better the performance
The powder coating has strong adhesion, tight coating, strong impact resistance, good toughness, high corner coverage, and also has good chemical resistance and electrical insulation properties. It is a new type of home wall decoration material.
5. High utilization rate
The powder coatings produced by some of the more well-known coatings on the market can be recycled after being oversprayed, with a high utilization rate of up to 99%.
6. Simple construction
The powder coating construction does not need to be applied with the primer, and a suitable coating film layer can be obtained in one-time construction. The construction efficiency is high and the time and cost are effectively saved.
7. Convenient transportation and storage
Ordinary coatings are basically water solvents, which are not so convenient for transportation and storage, while powder coatings are different. There is neither water nor solvent, and transportation is convenient and safe.
Our company also has HPMC for Wall Putty on sale, welcome to contact us.